Detcon DM-534C Bedienungsanleitung PDF herunterladen (Seite 12)

DM-534C Oxygen Sensor Assembly

DM-534C O2 Sensor Instruction Manual Rev.1.4 Page 8 of 18

5.5"

6.1"

5.825"

7.92"

0.5"

4.65"

Wall (or other

mounting surface

Splash Guard

O2 Sensor

Cal Port

1/4" Mounting holes

8-32 tapped

ground point

3/4" NPT Ports

Figure 7 Typical Outline and Mounting Dimensions

c) Observing correct polarity, terminate 3-conductor field wiring to the sensor base connector board in

accordance with the detail shown in

Figure 8.

d) Replace the plug-in transmitter circuit and replace the junction box cover.

Customer

Wiring

Wiring from

O2 Sensor

BlueBlue

White

Figure 8 Sensor Connector PCB

6.6 Remote Mounting Applications

Some sensor mounting applications require that the gas sensor head be remotely mounted away from the

sensor transmitter. This is usually true in instances where the gas sensor head must be mounted in a location

that is difficult to access. Such a location creates problems for maintenance and calibration activities. Detcon

provides the DM-534C sensor in a remote-mount configuration in which the sensor (Model DM-534C-RS) and

the transmitter (Model DM-534C-RT) are provided in their own condulet housing and are interfaced together

with a three conductor cable. Reference figure

Figure 9 below for wiring diagram.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Keine Kommentare

Detcon DM-534C Bedienungsanleitung Seite 12