Detcon 240 Bedienerhandbuch PDF herunterladen (Seite 15)

Sentinel CX

Sentinel CX Sensor Station IM Rev. 1.2 Page 11 of 11

Mounting Plate

Tripod Leg

Mounting

Hardware

Mounting

Support

Sensor with

Mini Condulet

Figure 10 Attach Sensor Brackets to Tripod

6. Hang the sensors on the brackets using the hook and pin supplied with the bracket.

7. Connect sensor cables to the sensor ports on the CX (Figure 1).

8. If the unit is ordered with the optional external A1 C1D2 Horn, the horn should be mounted either

on the tripod, or on a separate tripod. . The optional A1 C1D2 Horn requires the cable for the

External ‘Wet’ Alarms.

a. The horn should be wired to the ‘Wet’ Alarm Output cable per Figure 11.

b. The alarm Cable should be connected to the External Alarm Connector on the controller.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Keine Kommentare

Detcon 240 Bedienerhandbuch Seite 15